Electrical work is buried, boxed, and behind covers minutes after it's done. When an inspector, a homeowner, or a future electrician has a question, the only way to answer it without tearing things open is a photo record taken while everything was still visible.
Photograph what the cover will hide
- Panel interior: wiring, breaker layout, grounding and bonding, and a clear labeling shot
- Rough-in: every run, box, and junction before drywall covers it
- Terminations and connections before devices go on
- Service entrance, meter, and any utility-side work
Documentation that clears inspections
Inspectors appreciate — and sometimes require — photos of work that's already been covered. A time-stamped set of your rough-in and grounding proves it was done to NEC and to the AHJ's requirements, even after the walls are closed. It can turn a re-inspection into a phone call.
A clear shot of the finished, labeled panel is the reference every future service call starts from. It saves your techs time, prevents mistakes, and shows the homeowner a level of care most electricians skip.
Protect yourself on warranty and liability
When something electrical goes wrong in a house, everyone who ever touched it gets a phone call. A documented record of exactly what you installed, how, and when is your proof that your work was to code — and that whatever failed wasn't it.
WorkSiteCam gives every crew a one-tap camera that GPS- and time-stamps each photo, files it to the right job automatically, and turns the whole record into a branded report in seconds. Book a free 15-minute demo and see it on your own jobs.
